one watt high current transistors pnp silicon maximum ratings rating symbol value unit collectoremitter voltage mpsw51 mpsw51a v ceo 30 40 vdc collectorbase voltage mpsw51 mpsw51a v cbo 40 50 vdc emitterbase voltage v ebo 5.0 vdc collector current e continuous i c 1000 madc total device dissipation @ t a = 25 c derate above 25 c p d 1.0 8.0 watts mw/ c total device dissipation @ t c = 25 c derate above 25 c p d 2.5 20 watts mw/ c operating and storage junction temperature range t j , t stg 55 to +150 c thermal characteristics characteristic symbol max unit thermal resistance, junction to ambient r ja 125 c/w thermal resistance, junction to case r jc 50 c/w electrical characteristics (t a = 25 c unless otherwise noted) characteristic symbol min max unit off characteristics collectoremitter breakdown voltage (1) (i c = 1.0 madc, i b = 0) mpsw51 mpsw51a v (br)ceo 30 40 e e vdc collectorbase breakdown voltage (i c = 100 adc, i e = 0) mpsw51 mpsw51a v (br)cbo 40 50 e e vdc emitterbase breakdown voltage (i e = 100 adc, i c = 0) v (br)ebo 5.0 e vdc collector cutoff current (v cb = 30 vdc, i e = 0) mpsw51 (v cb = 40 vdc, i e = 0) mpsw51a i cbo e e 0.1 0.1 m adc emitter cutoff current (v eb = 3.0 vdc, i c = 0) i ebo e 0.1 m adc 1. pulse test: pulse width 300 s, duty cycle 2.0%. preferred devices are on semiconductor recommended choices for future use and best overall value. on semiconductor ? semiconductor components industries, llc, 2001 march, 2001 rev. 1 1 publication order number: mpsw51/d mpsw51 mpsw51a case 2910, style 1 to92 (to226ae) 1 2 3 * *on semiconductor preferred device collector 3 2 base 1 emitter
mpsw51 mpsw51a http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted) (continued) characteristic symbol min max unit on characteristics dc current gain (i c = 10 madc, v ce = 1.0 vdc) (i c = 100 madc, v ce = 1.0 vdc) (i c = 1000 madc, v ce = 1.0 vdc) h fe 55 60 50 e e e e collectoremitter saturation voltage (i c = 1000 madc, i b = 100 madc) v ce(sat) e 0.7 vdc baseemitter on voltage (i c = 1000 madc, v ce = 1.0 vdc) v be(on) e 1.2 vdc smallsignal characteristics currentgain bandwidth product (i c = 50 madc, v ce = 10 vdc, f = 20 mhz) f t 50 e mhz output capacitance (v cb = 10 vdc, i e = 0, f = 1.0 mhz) c obo e 30 pf figure 1. dc current gain figure 2. collector saturation region figure 3. aono voltages figure 4. temperature coefficient -1000 -10 i c , collector current (ma) 200 100 70 i b , base current (ma) -5.0 -50 -0.6 -0.2 0 -100 -500 -1.0 i c , collector current (ma) 0 -1.0 -0.8 -0.6 -0.4 -0.2 i c , collector current (ma) -0.8 -1.2 -1.6 -2.0 -2.4 -2.8 -200 h fe , current gain , collector voltage (volts) v, voltage (volts) 50 20 -100 -20 -50 -200 -500 -10 -20 -0.05 -0.1 -0.2 -2.0 -0.4 -0.8 -1.0 -2.0 -5.0 -10 -20 -50 t j = 25 c v be(sat) @ i c /i b = 10 -0.01 -0.5 -1.0 -0.02 -100 v ce -1000 -100 -500 -1.0 -200 -2.0 -5.0 -10 -20 -50 v b for v be -1000 v v ce = -1.0 v t j = 25 c v ce(sat) @ i c /i b = 10 v be(on) @ v ce = -1.0 v t j = 25 c i c = -100 ma i c = -50 ma i c = -1000 ma i c = -10 ma i c = -500 ma i c = -250 ma , temperature coefficient (mv/ c) b
mpsw51 mpsw51a http://onsemi.com 3 figure 5. current gain e bandwidth product figure 6. capacitance -20 -100 -10 i c , collector current (ma) 200 100 70 50 30 v r , reverse voltage (volts) -5.0 -20 c obo 160 120 80 0 -50 , current-gain - bandwidth product (mhz ) f t -200 -1000 -500 300 -10 -25 -15 40 c, capacitance (pf) t j = 25 c -1.0 -4.0 c ibo -2.0 -5.0 -3.0 c obo c ibo v ce = -10 v t j = 25 c f = 20 mhz figure 7. active region e safe operating area -10 -1.0 v ce , collector-emitter voltage (volts) -500 -200 -100 -50 -20 -10 -30 i c , collector current (ma) -2.0 -5.0 -40 -1.0 k mpsw51 current limit thermal limit second breakdown limit mpsw51a -20 duty cycle 10% t a = 25 c t c = 25 c 1.0 ms 1.0 ms 100 s
mpsw51 mpsw51a http://onsemi.com 4 package dimensions case 2910 issue al to92 (to226) c r n n 1 j section xx d 23 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. contour of package beyond dimension r is uncontrolled. 4. dimension f applies between p and l. dimensions d and j apply between l and k mimimum. lead dimension is uncontrolled in p and beyond dimension k minimum. r a p l f b k g h xx seating plane dim min max min max millimeters inches a 0.175 0.205 4.44 5.21 b 0.290 0.310 7.37 7.87 c 0.125 0.165 3.18 4.19 d 0.018 0.021 0.457 0.533 f 0.016 0.019 0.407 0.482 g 0.045 0.055 1.15 1.39 h 0.095 0.105 2.42 2.66 j 0.018 0.024 0.46 0.61 k 0.500 --- 12.70 --- l 0.250 --- 6.35 --- n 0.080 0.105 2.04 2.66 p --- 0.100 --- 2.54 r 0.135 --- 3.43 --- style 1: pin 1. emitter 2. base 3. collector on semiconductor and are trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scill c data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. publication ordering information central/south america: spanish phone : 3033087143 (monfri 8:00am to 5:00pm mst) email : onlitspanish@hibbertco.com tollfree from mexico: dial 018002882872 for access then dial 8662979322 asia/pacific : ldc for on semiconductor asia support phone : 13036752121 (tuefri 9:00am to 1:00pm, hong kong time) toll free from hong kong & singapore: 00180044223781 email : onlitasia@hibbertco.com japan : on semiconductor, japan customer focus center 4321 nishigotanda, shinagawaku, tokyo, japan 1410031 phone : 81357402700 email : r14525@onsemi.com on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. mpsw51/d north america literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 3036752175 or 8003443860 toll free usa/canada fax : 3036752176 or 8003443867 toll free usa/canada email : onlit@hibbertco.com fax response line: 3036752167 or 8003443810 toll free usa/canada n. american technical support : 8002829855 toll free usa/canada europe: ldc for on semiconductor european support german phone : (+1) 3033087140 (monfri 2:30pm to 7:00pm cet) email : onlitgerman@hibbertco.com french phone : (+1) 3033087141 (monfri 2:00pm to 7:00pm cet) email : onlitfrench@hibbertco.com english phone : (+1) 3033087142 (monfri 12:00pm to 5:00pm gmt) email : onlit@hibbertco.com european tollfree access*: 0080044223781 *available from germany, france, italy, uk, ireland
|
